Description
The DVM-210 A is a Class-D technology digital stereo amplifier module with an output power of 20W per channel.
The four-stage rotary switch behind the transparent front flap allows the setting of four different gains to adapt to existing audio input level.
The multi-color LED shows the operational readiness and stays green. In case of overload, the LED lights up red in the signal beat.
Please consider the following features:
- Easy installation and installation costs.
- Placement in subdivisions possible, the module width is only 1 HP (horizontal pitch).
- Low heat generation by digital circuitry.
- Protective circuit against short circuit, reverse polarity and overheating.
|
Technical data |
DVM-210 A |
|
Output power at 24V |
2x 20 W on 4 ohms / 2x 10 W on 8 ohms |
|
Frequency response -3dB |
40 – 30.000 Hz |
|
Audio inputs |
unbalanced |
|
Protection circuits |
thermal, short circuit, reverse polarity |
|
Rotary switch (4 gain stages) |
20dB, 26dB, 32dB, 36dB |
|
Input level |
0dB, -6dB, -12dB, -16dB |
|
input resistance |
60kohms, 30kohms, 15kohms, 10kohms |
|
Output impedance |
4 ohms |
|
Operating voltage |
10-28 V DC |
|
Current consumption at 24V/max. |
45mA/2A |
|
Connections |
screw terminals up to 2,5 mm_ |
|
Weight |
65 g |
|
Dimensions (WxHxD)/horiz. pitch |
89,7 x 62,2 x 17,8 mm; 1 HP |